GAL-ANA Help
Tools > Q-match
Q-match section. The window has a five main parts:

- Main menu.
- Groupbox Source.
- Groupbox Matching section.
- Groupbox Load.
- Control panel.
- File - common commands.
- Save save results in the file.
- Print print results.
- Exit close and return to main Tools window.
- Service
- Calculator On-screen calculator.
- Change unit for measurements of length:
- Meter meters.
- Millimetre millimetres.
- Feet feet.
- Feet-Imper Imperial system: feet and inch.
- Inch inch.
- Line edit enables the listed lines to be edited.
- Help - help.
This area displays the parameters of the source.

- Rout standard R.
- Frequency frequency.
- Power power.
- VSWR VSWR after matching section included.
The load (antenna) parameters are displayed in this area. Any antenna calculation performed in the main window will automatically update the R and jX values shown here.

- R real part of the load impedance.
- JX reactive part of the load impedance.
- Match loss losses in the match unit. This windows background colour changes if losses are high.
- Power active power in the load.
- VSWR VSWR of the load.
- Efficiency of the matching section. The Windows background colour changes if the efficiency is low.
Circuit the matching unit with calculated values.

- This area displays the matching section.
- The matching line types are selected from the two drop down menus in Line 1 & Line 2.
- The displays shows the calculated values for each line (physical length & length in wavelengths).
- Overlaid on the image are the electrical values of the two line are displayed.
- VSWR VSWR, measured at the beginning of the line.
- Zin input impedance, measured at the beginning of the line.
- Loss line loss, dB.

- Tune starts calculation.
- Set as match inserts calculated the LC matching section into model of the antenna in the main window.
- Frequency plot opens the frequency plot window.
Edited by G8ODE